Loading
Atlantic Yacht Basin has 88 years experience!

Tag Archives: repair

How To Make Sure Your Personal Flotation Device Fits Properly

http://www.boatsmartcanada.com/images/personal-safety-equipment.jpg

Did you know…

 

  • That half of all recreational boating fatalities happen in calm water?*
  • That these fatalities often happen close to shore?*
  • That in most cases, there were PFDs stored on board the boat, but they weren’t being utilized?*
  • That the number of U.S. boating accidents had steadily fallen from 1997 to 2012, but they have been on the rise since then?**

This is why The U.S. Coast Guard’ Boating Safety Division recommends that all boaters wear PFDs (personal flotation devices) while they are out on the water. Simply having them on the boat isn’t always enough to save a life.

Just wearing a PFD isn’t enough, though. It’s very important to select the right type of PFD, and to make sure that it fits properly. A PFD that doesn’t may slip off, be incapable of keeping the wearer afloat, cause an unconscious person to flip over, or in some cases, cause loss of blood flow or strangulation.

So how do you make sure your life jacket fits? Follow these guidelines, courtesy of The U.S. Coast Guard:

PFD Fitting Guidelines
Whether swimming, fishing, participating in water sports, or just having a family cruise, we want everyone to have a great time out on the water. As always, happy and safe boating from Atlantic Yacht Basin!

Sources:

*https://www.uscgboating.org/images/howtochoosetherightlifejacket_brochure.pdf

**https://americanboating.org/boating_fatality.asp

Importance of Fluid Analysis in a Maintenance Plan

Monitor the Health of Your Engines, Transmissions, and More with a Regular Monitoring Schedule

 

Here at Atlantic Yacht Basin, we have seen it time and time again in the nearly 80 years we have been taking care of boats. A boat owner brings his or her vessel to us to investigate a transmission that is balking, or an engine that is making an unusual noise or — in an extreme case – when the vessel has been towed to AYB following a catastrophic failure.

The owner may tell us that everything was fine until it all went downhill quickly. Oil is added regularly, fluids are changed at recommended intervals, and the owner is religious about watching the gauges when underway.  So what happened and why?

Chances are, the owner believes the maintenance schedule has been followed.  But if regularly scheduled fluid analysis has not been part of the maintenance plan, then the saying of “what you don’t know can hurt you” has never been truer.

WHAT IS FLUID ANALYSIS?

A small sample of oil from your engines and generator, fluid from the engine cooling system, hydraulic systems and more gives you and us an extremely accurate picture of the health of the heart of your vessel—the mechanical systems that endure  friction, heat and stress.

We send these samples to a laboratory with details—the more the better—about the equipment from which the fluid was drawn. Sophisticated lab instruments can detect a wide range of microscopic alloys and pollutants.

Quick Reference of Fluid Contamination

Quick Reference of Fluid Contamination

For example, an engine oil sample with a higher than normal level of iron may indicate wear from rings, valves, gears and other internal engine components. A spike in the amount of aluminum in the sample may indicate piston or bearing wear. Presence of fuel in the engine oil sample likely indicates a fuel injector that is dripping fuel, instead of emitting an extremely fine spray.  An oil sample can even tell you and us if your engine isn’t breathing well. High levels of silicon can indicate too much dust and dirt is getting into your engine – which means you need to check the air cleaner more often.

Click Here to Download a Reference List of the Most Common Fluid Contaminants.

*Photo: A long-time customer wintering with us requested an oil analysis. Copyright 2015-Atlantic Yacht Basin